SWANNANOA, N.C. and IRVINE, Calif., Jan. 29 /PRNewswire/ -- SMP Data Communications, a leading developer and manufacturer of high-speed cross-connect products for communication networks, recently participated in a comprehensive demonstration of 10GBASE-T products in operation at the Solarflare(R) Communications test facility in Irvine, California.
The validation trials to demonstrate 10GBASE-T operation over Category 6A cabling were performed on a 100 meter channel. The trials were run in a 100 meter, worst-case channel configuration as specified in the draft TIA augmented Category 6 standard, currently under development in the TIA TR 42.7 subcommittee. The channel configuration consisted of six around one (6A1) cables, bundled every eight inches. The equipment used for channel performance validation was Solarflare Communications 10Xpress(TM) 10GBASE-T PHYs that are currently sampling to OEM customers.
Bi-directional Ethernet traffic was sent over Solarflare's 10GBASE-T link using two 10Gb/s traffic generators with XAUI interfaces. At the same time, bi-directional 10GBASE-T traffic was running on all six neighboring channels simulating a worst-case alien crosstalk environment. All channels were configured for the maximum 100m length with four connectors in accordance with IEEE 802.3an 10GBASE-T standard and the draft TIA 568-B.2-10 Augmented Category 6 standard. There were no CRC errors in the received frames on both ends over several hours of testing.
Participating with Solarflare to provide representative channel configurations for the first functional testing of 10GBASE-T over Category 6A cabling demonstrates SMP's ongoing commitment to provide state-of-the-art connectivity products. These products not only exceed compliance to industry standards but are proven to perform as demonstrated by Solarflare's 10GBASE-T validation testing.
"Our competition offers connectivity products that only operate effectively when combined with the cable they also manufacture, in essence a 'tuned system' that costs the customer a premium and is not truly interoperable," stated Bill Reynolds, VP and general manager of SMP Data Communications. "This is especially true with hard-to-meet emerging standards and protocols such as 10GBASE-T and Augmented Category 6. SMP connectivity is designed to focus on verifiable throughput as well as 'the standards.' The US-made superior quality of our connectivity, derived from our own intellectual property, allows SMP to deliver connectivity that is economical and truly interoperable. This testing is a testament to our products capabilities and quality designs."
"This testing proves the reliability and robustness of the 10GBASE-T cabling and PHY products," said Bruce Tolley, VP of marketing at Solarflare. "These products are available today."
About SMP Data Communications
About Solarflare Communications
Permission is granted for reproduction of this material for the purpose of preparing product comparisons, writing articles and use as a reference when preparing press information about these products. This material may also be used in preparing specifications and/or bids in which Superior Modular Products are specified. Except for the above mentioned usage and for the purpose of quotation, all other quotation and reproduction is strictly forbidden without express written consent of Superior Modular Products. If you have questions or need more information in preparing articles, write-ups and editorials, or if you need camera-ready logos, quotes or photography, contact Marketing Services.
SMP Data Communications; Solarflare Communications Inc.
